For the easy disassembly prior to recycling and repair
- perfectly balanced and ergonomic handle
- economical
- durable
The RECYCLING screwdriver is a specially designed tool for repair- and recycling operations.
Especially when recycling electronic scrap material, a mechanical disassembly is required prior to the handling of chemical and thermal material. In most cases that requires the loosening of different screws.
The big challenge for a screwdriver is:
- to engage the screw drive with a bit
- to apply the required down-pressure right from the start, to avoid cam-out or ratcheting
- or the screwdriver to reach a higher loosening torque and therefore breakaway if screws are rusted, etc., which has a direct impact on the operators hand
The ergonomic housing grip is designed in accordance with the newest OSHA-requirements and helps to absorb the torque reaction force. Furthermore, the lower housing flares out [bell bottom] to simplify the required push-to start.
According to the required drive direction and the most positive support-grip, a technical clean solution is:
RECYCLING screwdriver for horizontal disassembly:
For the horizontal disassembly we recommend the use of a Screwdriver without clutch in pistolgrip design.
The screwdriver is started by an ergonomic trigger.
The bit change is done by an integrated quick change chuck.
The RECYCLING screwdriver operates as follows:
Set driver, engage bit, push trigger and tool will start and screw-connection is loosened.
Backout torque reaction can easily be absorbed by the pistolgrip form.
- Design execution: Pistolgrip
Torque range: up to max. 18 Nm
RECYCLING screwdriver for the vertical disassembly:
For the vertical disassembly we recommend the use of a reversible screwdriver with straight design.
The start occurs in 2-steps.
Possible backout torque reaction is limited by the adjustable, left-rotation safety-clutch.
The bit change is done by an integrated quick change chuck.
The RECYCLING screwdriver operates as follows:
Set driver, apply small down-pressure to engage bit with screw drive at reduced speed, apply full down-pressure and disassemble fastener.
- Design execution: Straight
Torque range: up to max. 10 Nm
